Brakes Repair

Herndon, VA’s Renowned Brake Repair Shop for European Cars

Dealing with brake troubles while riding your European car can be more than just a nuisance. Since the brake system is engineered to decelerate or stop your vehicle from motion once you press the brake pedal, when it malfunctions, it directly hampers your safety by increasing the risk of accidents due to abnormal vehicle stopping.

Relax! We at Auto Scandia, in Herndon, VA, stand out as the top choice for brake repairs due to our trained professionals and high-tech diagnostics, which make us unique among other repair centers. Moreover, using premium parts as replacements enhances our service quality in restoring braking performance to its original state.

European Auto Brake Repair

Servicing All Models Of:

Book Appointment

Standard Brake Malfunctions with Repair Tricks in Herndon, VA

Faulty Brake Pads

When the pads wear out, the metal parts of different brake components rub or grind against each other, producing loud and unusual squealing or grinding noises due to excessive friction. In this case, we can check and replace the damaged pads with new ones. Next, we verify the rotors and calipers for any signs of wear and tear, as the pads typically impact these surrounding components if left unattended for a few days. Replacing the rotor can be pretty expensive, so don’t neglect these unusual noises and contact our garage near Herndon, VA, immediately to restore peak braking efficiency.

Dripping Brake Fluid

The brake lever should feel firm and steady when pressed, but if it feels too soft or spongy, there may be leaks in the system, allowing the brake fluid to escape. First, our specialists will check the master cylinder, calipers, brake lines, and wheel cylinders for any signs of cracks or leaks. After locating the leak, we will seal it or replace the damaged component with a new OEM part, followed by flushing out the old fluid and refilling the system with high-quality, DOT-approved brake fluid. Thus, feel free to reach out to us at our repair facility located near Herndon, VA, to make your brake pedal solid and reliable again.

Distorted Brake Rotors

If the brake system experiences excessive heat and irregular wear, the rotors may become warped, causing a strange jerking or pulsing sensation in the brake pedal when the pedal is pressed. At our service center near Herndon, VA, we first evaluate the rotor’s thickness using specialized equipment. If the wear is minor, we will resurface it. However, for those that are completely damaged, replacement may be the only solution. Since distorted rotors can severely impact the stopping potential, contact us to regain a smooth, responsive, and safe braking experience.

Seized Brake Calipers

If your vehicle tilts to one side or emits a burning odor immediately after applying the brakes, it may signal a stuck caliper. This usually results from jammed pistons or slide pins, which stop the pad from releasing completely. Hence, come to our auto shop located in the vicinity of Herndon, VA, so that we can remove the caliper, clean and apply lubricant to the pins, and install new seals or calipers as required. At last, we will also verify the balance across all wheels to ensure uniform braking performance.

Perks Of Timely Brake Fixes in Herndon, VA

Improved Safety: Addressing brake issues promptly ensures your car stops reliably, even in emergencies, minimizing the risk of crashes and safeguarding you and others on the road.
Boosted Performance: A healthy brake system also maintains a minimal stopping distance by offering smooth and sharp responses, which is crucial for high-performance European cars.
Low Fuel Usage: With an optimally functioning brake system, your vehicle’s fuel efficiency improves due to reduced stress on the engine and transmission, resulting in diminished drag and resistance while driving.
Reduced Expenses: Spotting and treating faulty brake components on time prevents issues from escalating, keeping other nearby parts safe, and saving money on unnecessary repairs later.
Noise-Free Operation: Once you repair all brake malfunctions, you can easily eliminate unpleasant squeaking, grinding, or scraping sounds, ensuring a quieter and more comfortable drive for everyone.
Enhanced Resale Value: Regular brake servicing and timely repairs can improve your vehicle’s resale value, potentially encouraging higher offers.

FAQs

How often should brakes be inspected?

Brakes should be inspected once every 10,000 to 15,000 miles or annually.

What causes brake pads to wear out quickly?

Harsh driving habits, carrying excessive weight, applying sudden brakes, or using low-quality brake pads can lead to premature pad failure.

Can I drive with worn brake pads?

No, it can be dangerous to drive with worn brake pads due to minimized braking power and further rotor damage.

How often should brake fluid be changed?

Brake fluids should be changed every 2 years, or as mentioned in the owner’s manual.

What is ABS?

ABS refers to the Anti-lock Braking System, which stops the wheels from locking during intense braking.

How long does a brake repair take?

It might take 1 to 2 hours, depending on the brake condition.

Reviews & Testimonials

We would like to take an opportunity to express our deep appreciation for everyone who has helped build our community. For all of you who made this journey with us, and especially those of you who have been with us from the beginning, we extend our gratitude as we celebrate AutoScandia‘s 40th year in business. Visit our reviews page to see more kind words from happy customers.